MFRC522 не сканируется карта

У меня есть Arduino Uno и считыватель MFRC-522, с помощью макета я подключил его в соответствии с примером скетча, который является скетчем mfrc522 DumpInfo.

/*Typical pin layout used:
 * 
 *             MFRC522      Arduino 
 *             Reader/PCD   Uno/101
 * Signal      Pin          Pin     
 * -------------------------------
 * RST/Reset   RST          9          
 * SPI SS      SDA(SS)      10         
 * SPI MOSI    MOSI         11 / ICSP-4
 * SPI MISO    MISO         12 / ICSP-1
 * SPI SCK     SCK          13 / ICSP-3
 */

Я проверял проводку сотни раз. Консоль показывает Версия прошивки: 0x92 = v2.0 Сканируйте PICC, чтобы увидеть UID, SAK, тип и блоки данных...

но если карта находится рядом с чипом, она не будет сканировать или сбрасывать какую-либо информацию, никакая другая информация не отображается на последовательном мониторе.

Я пробовал использовать карты mifare classic 1k Nexus 6 и Samsung Galaxy S7

Правка: Все

    /*
    * ------------------------------------------------------------------------------------------------------------------
    * Example sketch/program showing how to read data from a PICC to serial.
    * --------------------------------------------------------------------------------------------------------------------
    * This is a MFRC522 library example; for further details and other examples see: https://github.com/miguelbalboa/rfid
    * 
    * Example sketch/program showing how to read data from a PICC (that is: a RFID Tag or Card) using a MFRC522 based RFID
    * Reader on the Arduino SPI interface.
    * 
    * When the Arduino and the MFRC522 module are connected (see the pin layout below), load this sketch into Arduino IDE
    * then verify/compile and upload it. To see the output: use Tools, Serial Monitor of the IDE (hit Ctrl+Shft+M). When
    * you present a PICC (that is: a RFID Tag or Card) at reading distance of the MFRC522 Reader/PCD, the serial output
    * will show the ID/UID, type and any data blocks it can read. Note: you may see "Timeout in communication" messages
    * when removing the PICC from reading distance too early.
    * 
    * If your reader supports it, this sketch/program will read all the PICCs presented (that is: multiple tag reading).
 * So if you stack two or more PICCs on top of each other and present them to the reader, it will first output all
 * details of the first and then the next PICC. Note that this may take some time as all data blocks are dumped, so
 * keep the PICCs at reading distance until complete.
 * 
 * @license Released into the public domain.
 * 
 * Typical pin layout used:
 * -----------------------------------------------------------------------------------------
 *             MFRC522      Arduino       Arduino   Arduino    Arduino          Arduino
 *             Reader/PCD   Uno/101       Mega      Nano v3    Leonardo/Micro   Pro Micro
 * Signal      Pin          Pin           Pin       Pin        Pin              Pin
 * -----------------------------------------------------------------------------------------
 * RST/Reset   RST          9             5         D9         RESET/ICSP-5     RST
 * SPI SS      SDA(SS)      10            53        D10        10               10
 * SPI MOSI    MOSI         11 / ICSP-4   51        D11        ICSP-4           16
 * SPI MISO    MISO         12 / ICSP-1   50        D12        ICSP-1           14
 * SPI SCK     SCK          13 / ICSP-3   52        D13        ICSP-3           15
 */

#include <SPI.h>
#include <MFRC522.h>

#define RST_PIN         9          // Configurable, see typical pin layout above
#define SS_PIN          10         // Configurable, see typical pin layout above

MFRC522 mfrc522(SS_PIN, RST_PIN);  // Create MFRC522 instance

void setup() {
    Serial.begin(9600);     // Initialize serial communications with the PC
    while (!Serial);        // Do nothing if no serial port is opened (added for Arduino based on ATMEGA32U4)
    SPI.begin();            // Init SPI bus
    mfrc522.PCD_Init();     // Init MFRC522
    mfrc522.PCD_DumpVersionToSerial();  // Show details of PCD - MFRC522 Card Reader details
    Serial.println(F("Scan PICC to see UID, SAK, type, and data blocks..."));
}

void loop() {
    // Look for new cards
    if ( ! mfrc522.PICC_IsNewCardPresent()) {
        return;
    }

    // Select one of the cards
    if ( ! mfrc522.PICC_ReadCardSerial()) {
        return;
    }

    // Dump debug info about the card; PICC_HaltA() is automatically called
    mfrc522.PICC_DumpToSerial(&(mfrc522.uid));
}

спецификация Веб-сайт Nxp /документы/информационный лист/MFRC522.pdf