«Загрузка завершена», но Уно все еще работает со старым скетчем

Итак, это мой первый опыт, я купил новый оригинальный Uno, попробовал написать там какой-нибудь код, но он застрял на запуске только одного скетча.

Инструменты->Платы — нормально, Инструменты->Порты — нормально.

Я пытаюсь создать новый скетч из Файл->Примеры->01. Основы->Мигните, и он успешно загружен, но Uno все еще выполняет старый код и отправляет данные в Serial Monitor (из пустого A0, где был потенциометр)

Я попробовал переустановить приложение Arduino, попробовал в Windows, попробовал только с питанием (только круглый порт 12 В, без USB), но он все равно запускал старый скетч. Когда я подключаю Uno к Mac или Windows, он сразу же начинает отправлять те же данные в Serial Monitor.

Нажатие, нажатие и удержание кнопки «Сброс»; кнопка с подключением или отключением чего-либо еще не работает.

==============

Вот мой последний код, который «застрял»; на Uno прямо сейчас:

const int myPin = A0;  

void setup() {
  Serial.begin(9600);  
  pinMode(3, OUTPUT);  
  pinMode(4, OUTPUT);  
  pinMode(5, OUTPUT);  
}

void loop() {
  int sensorValue = analogRead(myPin);  
  // Serial.print("Sensor value: ");
  Serial.println(sensorValue);  

}

И доказательство успешной загрузки:

Вот код Blink из примеров:

void setup() {
  // инициализируем цифровой вывод LED_BUILTIN как выход.
  pinMode(LED_BUILTIN, OUTPUT);
}

// функция цикла выполняется снова и снова, вечно
void loop() {
  digitalWrite(LED_BUILTIN, HIGH);  // включаем светодиод (HIGH - уровень напряжения)
  delay(1000);                      // подождем секунду
  digitalWrite(LED_BUILTIN, LOW);   // выключаем светодиод, понижая напряжение
  delay(1000);                      // подождем секунду
}

И доказательство успешной загрузки:

Вот мой Uno без всего, но с подсвеченным портом TX, когда я подключаю его к Mac/Windows (вы можете видеть, что лампочка L/13 светится темнее, чем должна, и я не знаю почему):

А вот непрекращающийся спам в Serial Monitor по скетчу из первого кода:

01:57:24.874 -> 430
01:57:24.874 -> 420
01:57:24.874 -> 425
01:57:24.874 -> 435
01:57:24.874 -> 424
01:57:24.874 -> 425
01:57:24.907 -> 425
01:57:24.907 -> 434
01:57:24.907 -> 422
01:57:24.907 -> 425
01:57:24.907 -> 425
01:57:24.907 -> 433
01:57:24.940 -> 420
01:57:24.940 -> 424
01:57:24.940 -> 423
01:57:24.940 -> 431
01:57:24.940 -> 417
01:57:24.940 -> 423
01:57:24.940 -> 422
01:57:24.973 -> 429
01:57:24.973 -> 415
01:57:24.973 -> 421
01:57:24.973 -> 422
01:57:24.973 -> 424
01:57:24.973 -> 416
01:57:25.005 -> 421
01:57:25.005 -> 428
01:57:25.005 -> 421
01:57:25.005 -> 419
01:57:25.005 -> 418
01:57:25.005 -> 426
01:57:25.036 -> 415
01:57:25.036 -> 417
01:57:25.036 -> 417
01:57:25.036 -> 424
01:57:25.036 -> 411
01:57:25.036 -> 416
01:57:25.036 -> 416
01:57:25.069 -> 424
01:57:25.069 -> 410
01:57:25.069 -> 416
01:57:25.069 -> 416
01:57:25.069 -> 423
01:57:25.069 -> 407
01:57:25.101 -> 415

=========== УПД: В IDE v. 1.8.19 у меня получилось вот это

Arduino: 1.8.19 (Mac OS X), Board: "Arduino Uno"

Sketch uses 924 bytes (2%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.
An error occurred while uploading the sketch
avrdude: verification error, first mismatch at byte 0x0002
         0x5d != 0x5c
avrdude: verification error; content mismatch


This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.

При включенном показе подробностей во время компиляции и загрузки я получил больше:

Arduino: 1.8.19 (Mac OS X), Board: "Arduino Uno"

/private/var/folders/g4/0ddwtmhx3y97b4nm8m2ns88c0000gn/T/AppTranslocation/9AA61328-BD81-4800-BA6D-7F5DD6005876/d/Arduino.app/Contents/Java/arduino-builder -dump-prefs -logger=machine -hardware /private/var/folders/g4/0ddwtmhx3y97b4nm8m2ns88c0000gn/T/AppTranslocation/9AA61328-BD81-4800-BA6D-7F5DD6005876/d/Arduino.app/Contents/Java/hardware -hardware /Users/mr_belogub/Library/Arduino15/packages -tools /private/var/folders/g4/0ddwtmhx3y97b4nm8m2ns88c0000gn/T/AppTranslocation/9AA61328-BD81-4800-BA6D-7F5DD6005876/d/Arduino.app/Contents/Java/tools-builder -tools /private/var/folders/g4/0ddwtmhx3y97b4nm8m2ns88c0000gn/T/AppTranslocation/9AA61328-BD81-4800-BA6D-7F5DD6005876/d/Arduino.app/Contents/Java/hardware/tools/avr -tools /Users/mr_belogub/Library/Arduino15/packages -built-in-libraries /private/var/folders/g4/0ddwtmhx3y97b4nm8m2ns88c0000gn/T/AppTranslocation/9AA61328-BD81-4800-BA6D-7F5DD6005876/d/Arduino.app/Contents/Java/libraries -libraries /Users/mr_belogub/Documents/Arduino/libraries -fqbn=arduino:avr:uno -vid-pid=2341_0043 -ide-version=10819 -build-path /var/folders/g4/0ddwtmhx3y97b4nm8m2ns88c0000gn/T/arduino_build_275559 -warnings=none -build-cache /var/folders/g4/0ddwtmhx3y97b4nm8m2ns88c0000gn/T/arduino_cache_275921 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.avr-gcc.path=/Users/mr_belogub/Library/Arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7 -prefs=runtime.tools.avr-gcc-7.3.0-atmel3.6.1-arduino7.path=/Users/mr_belogub/Library/Arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7 -prefs=runtime.tools.avrdude.path=/Users/mr_belogub/Library/Arduino15/packages/arduino/tools/avrdude/6.3.0-arduino17 -prefs=runtime.tools.avrdude-6.3.0-arduino17.path=/Users/mr_belogub/Library/Arduino15/packages/arduino/tools/avrdude/6.3.0-arduino17 -prefs=runtime.tools.arduinoOTA.path=/Users/mr_belogub/Library/Arduino15/packages/arduino/tools/arduinoOTA/1.3.0 -prefs=runtime.tools.arduinoOTA-1.3.0.path=/Users/mr_belogub/Library/Arduino15/packages/arduino/tools/arduinoOTA/1.3.0 -verbose /private/var/folders/g4/0ddwtmhx3y97b4nm8m2ns88c0000gn/T/AppTranslocation/9AA61328-BD81-4800-BA6D-7F5DD6005876/d/Arduino.app/Contents/Java/examples/01.Basics/Blink/Blink.ino
/private/var/folders/g4/0ddwtmhx3y97b4nm8m2ns88c0000gn/T/AppTranslocation/9AA61328-BD81-4800-BA6D-7F5DD6005876/d/Arduino.app/Contents/Java/arduino-builder -compile -logger=machine -hardware /private/var/folders/g4/0ddwtmhx3y97b4nm8m2ns88c0000gn/T/AppTranslocation/9AA61328-BD81-4800-BA6D-7F5DD6005876/d/Arduino.app/Contents/Java/hardware -hardware /Users/mr_belogub/Library/Arduino15/packages -tools /private/var/folders/g4/0ddwtmhx3y97b4nm8m2ns88c0000gn/T/AppTranslocation/9AA61328-BD81-4800-BA6D-7F5DD6005876/d/Arduino.app/Contents/Java/tools-builder -tools /private/var/folders/g4/0ddwtmhx3y97b4nm8m2ns88c0000gn/T/AppTranslocation/9AA61328-BD81-4800-BA6D-7F5DD6005876/d/Arduino.app/Contents/Java/hardware/tools/avr -tools /Users/mr_belogub/Library/Arduino15/packages -built-in-libraries /private/var/folders/g4/0ddwtmhx3y97b4nm8m2ns88c0000gn/T/AppTranslocation/9AA61328-BD81-4800-BA6D-7F5DD6005876/d/Arduino.app/Contents/Java/libraries -libraries /Users/mr_belogub/Documents/Arduino/libraries -fqbn=arduino:avr:uno -vid-pid=2341_0043 -ide-version=10819 -build-path /var/folders/g4/0ddwtmhx3y97b4nm8m2ns88c0000gn/T/arduino_build_275559 -warnings=none -build-cache /var/folders/g4/0ddwtmhx3y97b4nm8m2ns88c0000gn/T/arduino_cache_275921 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.avr-gcc.path=/Users/mr_belogub/Library/Arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7 -prefs=runtime.tools.avr-gcc-7.3.0-atmel3.6.1-arduino7.path=/Users/mr_belogub/Library/Arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7 -prefs=runtime.tools.avrdude.path=/Users/mr_belogub/Library/Arduino15/packages/arduino/tools/avrdude/6.3.0-arduino17 -prefs=runtime.tools.avrdude-6.3.0-arduino17.path=/Users/mr_belogub/Library/Arduino15/packages/arduino/tools/avrdude/6.3.0-arduino17 -prefs=runtime.tools.arduinoOTA.path=/Users/mr_belogub/Library/Arduino15/packages/arduino/tools/arduinoOTA/1.3.0 -prefs=runtime.tools.arduinoOTA-1.3.0.path=/Users/mr_belogub/Library/Arduino15/packages/arduino/tools/arduinoOTA/1.3.0 -verbose /private/var/folders/g4/0ddwtmhx3y97b4nm8m2ns88c0000gn/T/AppTranslocation/9AA61328-BD81-4800-BA6D-7F5DD6005876/d/Arduino.app/Contents/Java/examples/01.Basics/Blink/Blink.ino
Using board 'uno' from platform in folder: /Users/mr_belogub/Library/Arduino15/packages/arduino/hardware/avr/1.8.6
Using core 'arduino' from platform in folder: /Users/mr_belogub/Library/Arduino15/packages/arduino/hardware/avr/1.8.6
Detecting libraries used...
/Users/mr_belogub/Library/Arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-g++ -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10819 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -I/Users/mr_belogub/Library/Arduino15/packages/arduino/hardware/avr/1.8.6/cores/arduino -I/Users/mr_belogub/Library/Arduino15/packages/arduino/hardware/avr/1.8.6/variants/standard /var/folders/g4/0ddwtmhx3y97b4nm8m2ns88c0000gn/T/arduino_build_275559/sketch/Blink.ino.cpp -o /dev/null
Generating function prototypes...
/Users/mr_belogub/Library/Arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-g++ -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10819 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -I/Users/mr_belogub/Library/Arduino15/packages/arduino/hardware/avr/1.8.6/cores/arduino -I/Users/mr_belogub/Library/Arduino15/packages/arduino/hardware/avr/1.8.6/variants/standard /var/folders/g4/0ddwtmhx3y97b4nm8m2ns88c0000gn/T/arduino_build_275559/sketch/Blink.ino.cpp -o /var/folders/g4/0ddwtmhx3y97b4nm8m2ns88c0000gn/T/arduino_build_275559/preproc/ctags_target_for_gcc_minus_e.cpp
/private/var/folders/g4/0ddwtmhx3y97b4nm8m2ns88c0000gn/T/AppTranslocation/9AA61328-BD81-4800-BA6D-7F5DD6005876/d/Arduino.app/Contents/Java/tools-builder/ctags/5.8-arduino11/ctags -u --language-force=c++ -f - --c++-kinds=svpf --fields=KSTtzns --line-directives /var/folders/g4/0ddwtmhx3y97b4nm8m2ns88c0000gn/T/arduino_build_275559/preproc/ctags_target_for_gcc_minus_e.cpp
Compiling sketch...
/Users/mr_belogub/Library/Arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-g++ -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10819 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -I/Users/mr_belogub/Library/Arduino15/packages/arduino/hardware/avr/1.8.6/cores/arduino -I/Users/mr_belogub/Library/Arduino15/packages/arduino/hardware/avr/1.8.6/variants/standard /var/folders/g4/0ddwtmhx3y97b4nm8m2ns88c0000gn/T/arduino_build_275559/sketch/Blink.ino.cpp -o /var/folders/g4/0ddwtmhx3y97b4nm8m2ns88c0000gn/T/arduino_build_275559/sketch/Blink.ino.cpp.o
Compiling libraries...
Compiling core...
Using precompiled core: /var/folders/g4/0ddwtmhx3y97b4nm8m2ns88c0000gn/T/arduino_cache_275921/core/core_arduino_avr_uno_7dc84736bec69d7a3f526b3465643c6f.a
Linking everything together...
/Users/mr_belogub/Library/Arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc -w -Os -g -flto -fuse-linker-plugin -Wl,--gc-sections -mmcu=atmega328p -o /var/folders/g4/0ddwtmhx3y97b4nm8m2ns88c0000gn/T/arduino_build_275559/Blink.ino.elf /var/folders/g4/0ddwtmhx3y97b4nm8m2ns88c0000gn/T/arduino_build_275559/sketch/Blink.ino.cpp.o /var/folders/g4/0ddwtmhx3y97b4nm8m2ns88c0000gn/T/arduino_build_275559/../arduino_cache_275921/core/core_arduino_avr_uno_7dc84736bec69d7a3f526b3465643c6f.a -L/var/folders/g4/0ddwtmhx3y97b4nm8m2ns88c0000gn/T/arduino_build_275559 -lm
/Users/mr_belogub/Library/Arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-objcopy -O ihex -j .eeprom --set-section-flags=.eeprom=alloc,load --no-change-warnings --change-section-lma .eeprom=0 /var/folders/g4/0ddwtmhx3y97b4nm8m2ns88c0000gn/T/arduino_build_275559/Blink.ino.elf /var/folders/g4/0ddwtmhx3y97b4nm8m2ns88c0000gn/T/arduino_build_275559/Blink.ino.eep
/Users/mr_belogub/Library/Arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-objcopy -O ihex -R .eeprom /var/folders/g4/0ddwtmhx3y97b4nm8m2ns88c0000gn/T/arduino_build_275559/Blink.ino.elf /var/folders/g4/0ddwtmhx3y97b4nm8m2ns88c0000gn/T/arduino_build_275559/Blink.ino.hex
/Users/mr_belogub/Library/Arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-size -A /var/folders/g4/0ddwtmhx3y97b4nm8m2ns88c0000gn/T/arduino_build_275559/Blink.ino.elf
Sketch uses 924 bytes (2%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.
/Users/mr_belogub/Library/Arduino15/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude -C/Users/mr_belogub/Library/Arduino15/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf -v -patmega328p -carduino -P/dev/cu.usbmodem1101 -b115200 -D -Uflash:w:/var/folders/g4/0ddwtmhx3y97b4nm8m2ns88c0000gn/T/arduino_build_275559/Blink.ino.hex:i 

avrdude: Version 6.3-20190619
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
         Copyright (c) 2007-2014 Joerg Wunsch

         System wide configuration file is "/Users/mr_belogub/Library/Arduino15/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf"
         User configuration file is "/Users/mr_belogub/.avrduderc"
         User configuration file does not exist or is not a regular file, skipping

         Using Port                    : /dev/cu.usbmodem1101
         Using Programmer              : arduino
         Overriding Baud Rate          : 115200
         AVR Part                      : ATmega328P
         Chip Erase delay              : 9000 us
         PAGEL                         : PD7
         BS2                           : PC2
         RESET disposition             : dedicated
         RETRY pulse                   : SCK
         serial program mode           : yes
         parallel program mode         : yes
         Timeout                       : 200
         StabDelay                     : 100
         CmdexeDelay                   : 25
         SyncLoops                     : 32
         ByteDelay                     : 0
         PollIndex                     : 3
         PollValue                     : 0x53
         Memory Detail                 :

                                  Block Poll               Page                       Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
           eeprom        65    20     4    0 no       1024    4      0  3600  3600 0xff 0xff
           flash         65     6   128    0 yes     32768  128    256  4500  4500 0xff 0xff
           lfuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
           hfuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
           efuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
           lock           0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
           calibration    0     0     0    0 no          1    0      0     0     0 0x00 0x00
           signature      0     0     0    0 no          3    0      0     0     0 0x00 0x00

         Programmer Type : Arduino
         Description     : Arduino
         Hardware Version: 3
         Firmware Version: 4.4
         Vtarget         : 0.3 V
         Varef           : 0.3 V
         Oscillator      : 28.800 kHz
         SCK period      : 3.3 us

avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.00s

avrdude: Device signature = 0x1e950f (probably m328p)
avrdude: reading input file "/var/folders/g4/0ddwtmhx3y97b4nm8m2ns88c0000gn/T/arduino_build_275559/Blink.ino.hex"
avrdude: writing flash (924 bytes):

Writing | ################################################## | 100% 0.13s

avrdude: 924 bytes of flash written
avrdude: verifying flash memory against /var/folders/g4/0ddwtmhx3y97b4nm8m2ns88c0000gn/T/arduino_build_275559/Blink.ino.hex:
avrdude: load data flash data from input file /var/folders/g4/0ddwtmhx3y97b4nm8m2ns88c0000gn/T/arduino_build_275559/Blink.ino.hex:
avrdude: input file /var/folders/g4/0ddwtmhx3y97b4nm8m2ns88c0000gn/T/arduino_build_275559/Blink.ino.hex contains 924 bytes
avrdude: reading on-chip flash data:

An error occurred while uploading the sketch
Reading | ################################################## | 100% 0.13s

avrdude: verifying ...
avrdude: verification error, first mismatch at byte 0x0002
         0x5d != 0x5c
avrdude: verification error; content mismatch

avrdude done.  Thank you.